HKS Super Power Flow Replacement Filter Foam- 150mm – Red

Description

[vc_row full_width=”” parallax=”” parallax_image=”” css_id=”” full_content=””][vc_column width=”1/1″][vc_column_text]Manufacturer Part Number: 70001-AK031

Ideal Replacement for HKS Super Power Flow Reloaded Systems.

We recommend that you change these filters at regular intervals to keep your kit breathing as it should!

• Dry type: after 6 to 12 months, or drive 6,000km to 10,000km
• Wet type: after 3 to 6 months, or drive 3,000km to 5,000km

[/vc_column_text][vc_empty_space height=”10px”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]Step 1: Take the filter out of the frame

Release the frame bolt first and take out the filter from the frame.

Step 2: Change the filter

First take the used filter out. Then put the new filter into the frame as shown on the photo by pushing it hard and set it for the center hole.

Step 3: Be careful not to make a gap

Set the filter tight to the frame. Do not try it all at once but put it by step by step carefully. Try not to make any wrinkles.

Step 4: Finally set the bolt

Put the filter in the frame tightly and set the bolt firmly. Make sure again there is no gap between the filter and the frame.

More Information available at:
www.hkseurope.com/[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”5721″ border_color=”grey” img_link_large=”” img_link_target=”_self” img_size=”full”][vc_single_image image=”5333″ alignment=”” style=”” border_color=”grey” img_link_large=”” img_link_target=”_self” css_animation=”” img_size=”full”][/vc_column][/vc_row]