Nissan R35 GTR 07-12′ – HKS ATSC Active Torque Split Computer (87089993)
£375.00 Ex.Vat | £450.00 Inc.VAT
SKU#53245 | 45006-AN002
HKS ATSC Active Torque Split Computer
HKS ATSC active torque split computer for a Nissan R35 GTR.
- The 4WD system of the R35 GT-R is electronically controlled. The front torque distribution is controlled by the drive condition. ATSC is the device to control the front torque distribution to be an appropriate level.
- Front torque distribution is available in 4 levels.
Just press a switch to change the setting level.The number of the LED blinking represents the setting level.
Only 1 left in stock
Description
- Oversteering during a high load driving can be overcame.
Therefore, stable driving under high load is possible. - Recommended for a highly tuned vehicle (GT800SPEC / GT600PACKAGE / GT570PACKAGE)
Proper torque distribution can optimize the engine performance. - Simple installation.
- ATSC controls the torque when the speed goes beyond 50km/h without applying a brake. It won’t lead instability at start or during a low speed driving.
Install the main unit to the E-TS Unit underneath the driver’s seat using the Coupler-ON Harness.
Required installation time is approximately 2 hours.
HKS ATSC Active Torque Split Computer for Nissan R35 GT-R
The 4WD system on the Nissan R35 GT-R is electronically controlled, with the front torque distribution being determined by driving conditions, but on highly tuned cars the front / rear torque split can lead to excessive oversteer. The HKS ATSC optimises this for improved high load / high speed stability and performance.
The HKS Active Torque Split Computer enables users to correct the front torque distribution for optimal performance driving, when oversteer can occur during high load driving due to lack of front torque. By enabling a proper front / rear torque distribution, drivers can make full use of the engine’s power output, particularly on tuned R35 GT-R’s.
Therefore, ATSC is recommended for use on vehicles with high power GT570/600/800 specifications or similar.
The HKS ATSC R35 GT-R system can operate at 4 different levels. The user can easily identify the profile through the flashing LED light and switch between them in real time. Installation is made simple with the plug and play harness which can connect and disconnect easily to the Nissan E-TS unit under the driver’s seat. Installation time is approximately two hours. The HKS ATSC controller is active on the R35 Nissan GT-R above 50km/h and when the brake is not applied. Therefore, it will not lead to instability from standing start or during low speed driving.